ADVICE & SOLUTIONS

FIXING TILES ON EXISTING PAINT WORK

 
ADVICES PREPARATION APPLICATION FINISHING

Enables tiles to be applied directly over existing paint in good condition, with a suitable primer.

 

• SPECIAL 2 COMPONENT EPOXY or POLYURETHANE TYPE FLOOR PAINTS

• ALL INTERIOR AREAS FOR PRIVATE USE

 

Recommendations :

• To assess the adhesion of the paint, carry out a mechanical sounding with a cutter using cross hatch tests.

• If the test results are positive, the paint can be retained. If not, it should be completely stripped.


APPLICATION AREAS

FLOORS : Special 2 component epoxy or polyurethane type floor paints in perfect condition on cement floors (concrete or cement based mortar).

INTERIOR: All types of rooms in private premises. Other application areas, other types of paint and poured floor resins: please consult us.

WALLS: Water insensitive, unsaponifiable paints applied to substrates suitable for bonding ceramic coverings and compatible with the moisture level of the renovated room.

 

CONTROLS - SURFACE PREPARATION

 

• Check that the paint is in perfect condition over the whole surface area: it should be hard, sound, adhere well and have no blisters or fissures  >or = 0.2 mm.

 

• Score and roughen the paint surface to facilitate and increase the bonding of the adhesive with rough sandpaper or with a metal brush disc, then thoroughly remove all traces of dust.

Adhesion test: Carry out a cross-hatch test with a cutter in a small area. The adhesion of the substrate is considered as good if 80% of the scored area is adherent. If this is not the case, sand or strip the substrate.

 

• Clean the surface by brushing with a causting cleaning solution. Use, for example, a nylon brush then rinse thoroughly and allow to dry

 

• Check that the paint is insensitive to lifting.


For fixing stoneware:

- interior floors: CERMIGRIP primer + (CERMISOL, CERMIGRES, CERMITEX , CERMIPLUS , CERMIPLUS RAPID, CERMIFLOOR , CERMIFLEX N / ALG , CERMIFLOOR RAPID / HPR, CERMIFLEX ALG, CERMIDUR)

- interior walls: CERMIGRIP primer +( CERMIGRES , CERMITEX , CERMIPLUS, CERMIPLUS RAPID, CERMIFLEX ALG, CERMIDUR, CERAMFLEX )

 

For fixing earthenware:

- CERMIGRIP primer + (CERMIGRES, CERMITEX, CERMIPLUS , CERMIPLUS RAPID, CERMIFLEX ALG , CERMIDUR)

- CERMIFIX ALG - CERMIFIX HP - CERAMFLEX


• Use CERMIJOINT, CERMIJOINT TX, EPOGLASS - EPOSOL for the jointing, depending on the case.

 

• Water proofing: please consult us.


Associated products
BIENVENUE SUR NOTRE SITE

Choisissez votre langue / Choose your country :

Fermer
Information COVID-19

« La santé de notre personnel est notre priorité »

Nous vous informons que CERMIX France a stoppé son activité, et ce pour l’instant jusqu’à nouvel ordre.

Chaque semaine nous étudions et mesurons les risques sanitaires, et les possibilités de remise en route. Notre production, ainsi que nos expéditions restent pour l’instant arrêtées. Cette difficile décision a été prise en conscience, dans le cadre de la préservation de la santé de notre personnel, et de la progression de l’épidémie.

Nos équipes reviendrons vers vous dès qu’une reprise de notre activité sera envisageable.

La direction,

Fermer
LEGAL INFORMATION

Site edited by : CERMIX
rue de la belle croix
62240 Desvres /
SAS au capital de 7 556 157 € /
RC Boulogne sur Mer B 414 897 306
Publication Director : Julien SCHLOUPT
Hosting :

OVH
2 rue Kellermann
59100 Roubaix
France

CNIL (civil liberties) declaration : N°857714
Produced by : Keblow
Photo credits : Cermix
Istockphoto®
fotolia®

close
Page available soon

This page is currently under construction and will be available shortly.
Thank you for your understanding.


CLOSE
Vidéo

 
 
CLOSE