Adhesive mortar for edges


  • Shrinkage-compensated
  • High mechanical resistance
  • Good sulfate-resistance (sea water, sewage, etc.)
  • Can be used to correct uneven areas in the substrate up to 50 mm thick
  • Good resistance to freeze/thaw cycles as well as to de-icing salts
  • Easy to apply and clean up
  • 5 - 50 mm
  • Compliant with normEN 1504-6
  • Product characteristics
  • Application areas
  • Documentation
  •  Grey
Installation temperature
5-30 °C
Particle size
1.6 mm
Time before foot traffic
2 hr
Start of setting
> 20 min at 21 °C
End of setting
< 60 min at 21 °C
2 kg/m²/mm thick
25 kg bags
Shelf life
12 months
Storage conditions
Store in a dry, well ventilated place, between +5°C and +35°C
Compressive strength
30 MPa at 24 hr | 40 MPa at 7 days | 70 MPa at 28 days
Application :
Traffic lanes, Exterior floors 
Substrates :
Concrete, Cement-based sealant, Block of aerated concrete 
Suitable for :
For bonding traffic islands, curbs, slabs, concrete basins and making joints and curbs 
Not suitable for :
A crumbling, greasy or dirty surface 

Recently viewed products

You do not have any products in the comparison tool