Our products (50 results)

CERMIREP RAPID R3 

Quick-setting light grey repair mortar

  • Compressive strength: 15 MPa after 2 hours
  • Excellent thixotrophy
  • Chloride-free, non-corrosive
  • Easy to apply with a trowel
  • Shrinkage-compensated
    •
    • 3-70 mm
    • Compliant with normEN 1504-3

    CERMIREP R4 

    Shrinkage-compensated fibre-reinforced repair mortar

  • Suitable for thicknesses from 10 to 50 mm
  • Can be applied manually or pumped or sprayed
  • Excellent adhesive bond
  • Chloride-free, non-corrosive
  • Ready to use, requires only the addition of water
  • Perfectly compatible with concrete and masonry
    •
    • Compliant with normEN 1504-3
    • 10-50 mm

    CERMIREP RAPID R3 

    Quick-setting light grey repair mortar

  • Compressive strength: 15 MPa after 2 hours
  • Excellent thixotrophy
  • Chloride-free, non-corrosive
  • Easy to apply with a trowel
  • Shrinkage-compensated
    •
    • 3-70 mm
    • Compliant with normEN 1504-3

    CERMIREP PASSIV  

    Corrosion protection and steel passivation

  • High and durable protection due to active corrosion inhibitors
  • Goes on quickly and easily with a brush
  • Ready to use, requires only the addition of water
  • Exceptional adhesion to steel and other supports
  • The product is white, so you can see where it has been applied
    •
    • Compliant with normEN 1504-7

    CERMIMUR F  

    Concrete levelling

  • Thickness from 0.3-4 mm
  • Extra-smooth finish
  • Very good covering power
  • Easy to apply and smooth
  • Adhesion > 1.5 MPa
    •
    • 0.3-4 mm

    MORTIER 350 

    Universal mortar measured to 350 kg/m³

  • Traditional ready-to-mix mortar
  • Easy to transport
  • Consistent measurement and performance
  • Available as MORTIER 350 RAPID
    •
    • 10 - 60 mm

    CERMIROAD ASPHALT 

    Cold-mix bituminous asphalt

  • Ready to use
  • Immediate return to service
  • Can be used all year round, in any weather
  • Excellent resistance to de-icing salts
  • Similar resistance to hot-mix asphalts
    •
    • 1-10 cm
    • immediate

    CERMISIL i-TECH 
    New

    Water-based silicone sealant

  • Easy to smooth and clean with water
  • Perfect for walk-in, tiled and moulded showers
  • Can be applied on damp surfaces
  • Good adhesion on concrete, ceramic and acrylic surfaces
  • Excellent mould-resistance
  • Can be painted
    •
    • 2-10 mm
    • Compliant with norm EN 12004

    JOINT i-TECH EXTRA FIN 2.0 
    Off-the-shelf

    Coloured grout for joints from 1 to 10 mm

  • Especially for rectified tile
  • Easy to clean without removing grout
  • Makes efflorescence less obvious
  • Really smooth finish
  • Water-repellent
    •
    • 1-6 mm
    • Compliant with norm EN 13888CG2WA

    CERMIROAD FIX 

    Adhesive mortar for edges

  • Shrinkage-compensated
  • High mechanical resistance
  • Good sulfate-resistance (sea water, sewage, etc.)
  • Can be used to correct uneven areas in the substrate up to 50 mm thick
  • Good resistance to freeze/thaw cycles as well as to de-icing salts
  • Easy to apply and clean up
    •
    • 5 - 50 mm
    • Compliant with normEN 1504-6

    CERMIROAD MB 

    Micro-concrete for road edges and sealing manhole and hydrant covers

  • Shrinkage-compensated
  • Thixothropic: does not require framing
  • High initial and final mechanical resistance
  • Short set time for fast return to service
  • Resistance to freeze/thaw cycles as well as to de-icing salts
  • Product can be applied over a wide temperature range
    •
    • 30-300 mm
    • 2 hr

    CERMIGROUT 08 

    Micro-concrete for sealing and shimming from 50 mm

  • Excellent fluidity with low water addition
  • Shrinkage-compensated
  • High vibration- and mechanical-resistance
  • Excellent adhesive bond
  • Chloride-free, non-corrosive. Does not affect the reinforcements
  • Oil-resistant
    •
    • + 50 mm
    • Compliant with normEN 1504-6

    CERMIREP HSR R4  

    High sulfate-resistant repair mortar – Class R4

  • Can be applied manually or pumped or sprayed
  • Excellent adhesive bond
  • Suitable for thicknesses from 10 to 50 mm, even when vertical
  • Chloride-free, non-corrosive, does not affect the reinforcement
  • Shrinkage-compensated
  • Perfectly compatible with concrete and masonry
    •
    • Compliant with normEN 1504-3
    • 10-50 mm

    CERMIREP R4 

    Shrinkage-compensated fibre-reinforced repair mortar

  • Suitable for thicknesses from 10 to 50 mm
  • Can be applied manually or pumped or sprayed
  • Excellent adhesive bond
  • Chloride-free, non-corrosive
  • Ready to use, requires only the addition of water
  • Perfectly compatible with concrete and masonry
    •
    • Compliant with normEN 1504-3
    • 10-50 mm

    CERMIPROOF FLEX 

    Waterproof, flexible and protective coating for two-component concrete

  • Optimal adhesion to the support
  • More flexible than a traditional mortar
  • Waterproofing but permeable to water vapour
  • Resistance to hydrostatic pressures and backpressures
    •
    • Compliant with normEN 1504-2
    • 1-2 mm

    CERMIPROOF FC 

    Thin cement-based waterproofing coating for concrete and masonry

  • Excellent adhesive bond
  • Waterproofing but permeable to water vapour
  • Very good resistance to hydrostatic pressures and backpressures
  • Can be applied directly on concrete and masonry supports
    •
    • Compliant with normEN 1504-2

    CERMIJOINT PRO LARGE 

    Grout for wide joints from 3 to 15 mm

  • Better waterproofing than traditional mortars
  • Regular appearance
  • For manual use or with a grouting machine
  • Water-repellent
  • Can be powdered
    •
    • Compliant with norm EN 13888CG2WA
    • 3-15 mm

    CERMICLEAN 

    For degreasing surfaces – cleaning product

  • Ready to use
  • Powerful cleaner
  • Quick and easy to use
  • Translucent
    •

    CERMINET 

    Removes cement residue – cleaning product

  • Powerful concentrated cleaner
  • Quick and easy to use
  • Makes surfaces marked with cement cleaner
  • Removes residue of hardened cement
  • Translucent
    •

    CERMITHANE 
    Expert Solution

    MS Polymer-based hybrid adhesive sealant High performance

  • MS Polymer-based hybrid sealant
  • Use it for flexible, sealed, resistant assemblies
  • Excellent abrasion resistance. Can be sanded
    •

    CERMIJOINT COLOR 
    Off-the-shelf

    Coloured grout for joints from 1 to 6 mm

  • For grouting all types of ceramic and similar coverings
  • Does not scratch earthenware
  • Has even colour
  • Waterproof
  • Looks smooth and neat
  • Water-repellent
    •
    • Compliant with norm EN 13888CG2WA
    • 1-6 mm

    CERMIJOINT PRO FIN 
    Off-the-shelf

    Coloured grout for joints from 1 to 6 mm

  • For grouting all types of ceramic and similar coverings
  • Does not scratch earthenware
  • Has even colour
  • Waterproof
  • Looks smooth and neat
  • Water-repellent
    •
    • Compliant with norm EN 13888CG2WA
    • 2-10 mm
    • 1-6 mm

    JOINT I-TECH CONFORT 
    Off-the-shelf

    Ready-to-use grout for wall tiles and work surfaces – 1 to 6 mm joints

  • Saves time
  • Neat, smooth finish
  • Remains flexible after drying, resists vibrations and deformations
  • Perfect for small formats, work surfaces and shower walls
  • Does not form hollows
  • Has even colour
    •
    • 1-6 mm

    CERMIJOINT TX 

    Grout for joints from 3 to 15 mm

  • Better waterproofing than traditional mortars
  • Regular appearance
  • For manual use or with a grouting machine
  • Water-repellent
  • Can be powdered
    •
    • Compliant with norm EN 13888CG2WA
    • 3-15 mm

    CERMIJOINT SOUPLE 

    Grout for wide joints – 3 to 10 mm – for flexible substrates

  • Absorbs mechanical strain
  • Can be used without control joints for façades
  • Resists weather-related stresses: moisture, frost and strong sunlight
    •
    • 3-10 mm

    CERMIJOINT PRO SOUPLE 

    Grout for joints 3 to 10 mm wide for flexible substrates

  • Absorbs mechanical strain
  • Can be used without control joints for façades
  • Resists weather-related stresses: moisture, frost and strong sunlight
    •
    • 3-10 mm

    CERMIJOINT HRC 

    Chemical-resistant grout for 2 to 10 mm joints

  • Resists chemicals: solvents, weak acids and bases
  • Water-repellent
  • Ideal for swimming pools
    •
    • Compliant with norm EN 13888CG2WA
    • 2-10 mm

    EPOxySTYL 

    Two-component epoxy mortar for tiling and grouting tiles - 1 to 10 mm

  • Especially for decorative work, smooth, thin, water-repellent
  • Suitable for small formats
  • Exceptionally resistant to moisture, chemicals and mechanical stresses
  • Recommended for swimming pools, spas, steam rooms, Roman showers and the like
  • Easy to mix, apply and clean
    •
    • 1-10 mm
    • Compliant with norm EN 12004R2
    • Compliant with norm EN 13888RG

    EPOGLASS 2.0 

    Two-component epoxy mortar for laying and grouting tile – 1 to 10 mm joints

  • Suitable for small formats
  • Closed, smooth, non-porous surfaces forming a water-repellent screen
  • Exceptionally resistant to moisture, chemicals and mechanical stresses (P4S)
  • Recommended for industrial kitchens, public swimming pools, spas, steam rooms, laboratories, etc.
  • Easy to mix, apply and clean
    •
    • 1-10 mm
    • Compliant with norm EN 12004R2
    • Compliant with norm EN 13888RG

    EPOSOL 2.0 

    Two-component epoxy mortar for laying and grouting tile – 3 to 15 mm joints

  • Suitable viscosity for floors
  • Makes for a thin, smooth surface
  • Exceptionally resistant to moisture, chemicals and mechanical stresses (P4S)
  • Recommended for industrial kitchens, public swimming pools, spas, steam rooms, laboratories, etc.
  • Easy to mix, apply and clean
    •
    • 3-15 mm
    • Compliant with norm EN 12004R2
    • Compliant with norm EN 13888RG
    • Compliant with norm EN 12004

    CERMIGRÈS  

    High-performance adhesive mortar for routine new work and renovation

  • Suitable for fixing all types of ceramic and similar coverings up to 60 x 60 cm
  • New work and renovation
    •
    • 60 x 60 cm
    • Compliant with norm EN 12004C2ET

    CERMITEX 

    High-performance adhesive mortar for routine new work and renovation. Less dust

  • Suitable for fixing all types of ceramic coverings on interior floors and walls, exterior floors and renovation
  • Multi-purpose
  • Used in private swimming pools
    •
    • Compliant with norm EN 12004C2ET

    CERMITERRASSE 
    Best Seller

    High-performance adhesive mortar especially for outdoor floors

  • Particularly suited for fixing ceramic or similar tile for outdoor floors
  • Suitable for laying slab and thick stone
  • Can be used to correct uneven areas in the thickness (up to 25 mm thick)
  • Withstands sharp temperature changes
    •
    • Compliant with norm EN 12004C2E

    CERMIPLUS 2.0 
    Best Seller

    High-performance smooth adhesive mortar for routine new work and renovation. Normal and fluid consistencies

  • Longer working time
  • Skid resistant
  • Excellent workability
    •
    • Compliant with norm EN 12004C2ET/EG

    CERMICAR 

    High-performance adhesive for new wall substrates

  • Ready to use
  • Moisture-resistant
  • Longer working time
  • Excellent adhesive bond
    •
    • Compliant with norm EN 12004D2ET

    CERMIFIX 
    Off-the-shelf

    Adhesive with high water-resistance

  • Ready to use
  • Skid resistant
  • Longer working time
  • Highly moisture-resistant
    •
    • Compliant with norm EN 12004D2ET
    • 45 x 45 cm

    CERMIPLUS XL FLEX 2.0 
    Off-the-shelf

    High-performance adhesive mortar with high plasticity. Normal or fluid mix

  • Longer working time
  • Apply directly to existing tile
  • Install on electric underfloor heating
  • Apply to façades and swimming pools
  • Formula reduces dust emission during mixing by 70-85%
  • Single or double spreading on the mixture
    •
    • Compliant with norm EN 12004C2S1ET
    • 100 x 100 cm

    CERMIFLEX XTREM 
    Expert Solution

    High-performance, high-plasticity adhesive mortar, single spreading for floors and walls

  • For applying very large and thin formats bigger than 100 x 100 cm
  • Single spreading for floors and walls
  • Easy to lay and better yield
  • Very highly malleable
  • Suitable for very many substrates for new work and renovation
    •
    • Compliant with norm EN 12004C2S2E

    CERMITANCHE 

    Under-tile waterproofing system (SEL)

  • All indoor spaces
  • For use under bonded tiles and floating bedded tiles
  • Can be used as a SPEC without an AT75 reinforcement
  • Highly elastic
  • No toxic fumes or solvent vapours
  • Ready to use
    •

    RAGREMAX 
    Expert Solution

    Multi-purpose levelling screed for high traffic. 3-30 mm thick

  • Suitable for high-traffic areas
  • Works on a wide variety of substrates
  • Good self-levelling
  • Dries quickly
  • Surfaces look fine and regular
  • New work and renovation
    •
    • hot water
    • 3-30 mm

    RAGRENOV S30 

    Fibre-reinforced screed for high traffic. 3-30 mm thick

  • High performance: mechanical strength and highly flexible
  • Dries quickly
  • New work and renovation
  • Can be pumped
    •
    • 3-30 mm

    RAGREFOR 
    Expert Solution

    Fibre-reinforced screed for extremely high traffic. 3-30 mm thick

  • Salvaging indoor or outdoor floors
  • Good self-levelling
  • Thick with fast coverage
  • New work and renovation
  • Foot traffic OK without another coating
  • Fast coverage
    •
    • 3-30 mm

    CERMIFILM 

    Adhesive primer for new floors, porous and moderately porous substrates

  • Strengthens mortar adhesion
  • Evens out substrate porosity
  • Single-component
  • Ready to use
  • Solvent-free
    •

    CERMIGRIP 

    Adhesion primer for new work and renovation. Non-porous substrates

  • Improves mortar adhesion
  • Single-component
  • Solvent-free
  • Ready to use
    •

    CERMIPROOF ST 
    Expert Solution

    Fibre-reinforced under-tile waterproofing system (no reinforcement membrane)

  • For all infoor and outdoor locations
  • For use under bonded tiles and floating bedded tiles
  • Resists cracking
  • Suitable for submerged walls
  • Excellent adhesive bond
  • Does not require a reinforcement membrane
    •

    CERMILATEX 

    Admixture resin

  • Improves mortar adhesion
  • Reduces porosity and strengthens waterproofing
  • Improves consistency and mechanical performance
    •

    RAGREPRO 

    Self-levelling screed. Great for large-scale projects New work. 3-10 mm thick

  • Easy to mix
  • Good self-levelling
  • Can be pumped
  • Surfaces look fine and regular
    •
    • Hot water
    • 3-10 mm

    CERMIPRIM RAPID 
    Best Seller

    Adhesion primer for new work and renovation. Moderately porous and closed substrates

  • Strengthens mortar adhesion
  • Easy and quick to apply
  • Apply on primer and epoxy coating
  • Dries quickly
  • Ready to use
  • Solvent-free
    •

    CERMIPRIM UNIVERSEL 
    Off-the-shelf

    Adhesion primer for new work and renovation. Porous and closed substrates

  • Strengthens mortar adhesion
  • Evens out substrate porosity
  • Single-component
  • Ready to use
  • Solvent-free
    •

    CERMICRYL 
    Off-the-shelf

    Under-tile damp-proof protection system (SPEC)

  • Easy to apply using a roller
  • Highly elastic
  • No toxic fumes or solvent vapours
  • Ready to use
    •

    Our tips (12 results)

    How to tile very wet areas
    How to tile terraces
    How to tile on calcium sulfate-based self-levelling screed
    How to tile new floors
    How to tile heated floors
    How to tile wooden floors
    How to tile swimming pools
    How to tile areas subject to high mechanical loads
    How to tile rooms that get wet
    How to tile façades
    How to tile existing indoor paint
    How to tile an existing ceramic coating

    Our project case studies (2 results)

    Construction of the César Lemaître school in Vernon
    Renovation of the Saint-Pierre-du-Vauvray arch bridge

    In the website pages (1 result)

    Terms and Conditions of Sale

    Any questions?

    Do you need information about a product?

    Contact us
    Compare
    You do not have any products in the comparison tool
    Compare